Carbon Fiber PC+PBT Filament 2.85mm 500g

Carbon Fiber ABS, PETG, PC/PBT, and Nylon

• Proprietary Carbon Fiber fill on all Resins
• Added stiffness
• Improved dimensional stability
• Excellent surface finish

Recommended Print Settings:

CF PC/PBT:

• Extruder:  250-260°C.  (Better layer bonding at higher temperatures)
• Bed:  90 - 100°C
• Hardened Nozzle: 0.4mm or larger (.6mm recommended)
• Layer Height:  Ideal layer height is 50-60% of nozzle diameter

CF ABS: 

• Extruder:  230-240°C
• Bed:  110°C 
• Hardened Nozzle: 0.4mm or larger  (.6mm recommended)
• Layer Height:  Ideal layer height is 50-60% of nozzle diameter

CF PETG:

• Extruder:  240-250°C
• Bed:  90°C
• Hardened Nozzle: 0.4mm or larger  (.6mm recommended)
• Layer Height:  Ideal layer height is 50-60% of nozzle diameter

CF Nylon:

• Extruder:  240-260°C.  (Better layer bonding at higher temperatures)
• Bed:  90 - 100°C
• Hardened Nozzle: 0.4mm or larger  (.6mm recommended)
• Layer Height:  Ideal layer height is 50-60% of nozzle diameter
• Drying - Nylon will absorb more moisture than other resins when left exposed. Make sure to keep this filament in a dry location between uses.  If the filament does get wet, you can dry it out for 2-3 hours at 70-80°C

**We recommend using our Hardened Steel Nozzles if you are printing Carbon Fiber