Wanhao D5S 3D Printer


Collections: 3D Printers

Type: Unknown Type


The Duplicator 5S features a large (16mm) Z-Axis threaded rod allowing for sturdier vertical movement. Featured in all Duplicator 5 series printers is the fastest known extruder system in 3D printing…the Bowden extruder setup prints at speeds in excess of 300mm/s. These speeds are complemented by a built-in cooling fan designed to minimize warping and improve extrusion layering. The circuitry and electronics found in the Duplicator 5S are second to none in terms of quality. The Duplicator 5S comes with a custom built motor shield, custom rotary dial touch controller/LCD/SD Card combo, and custom endstop switches.

The improved 5S Rock XV Steel ExoFrame provides a sturdy frame allowing for a taller build capability than any other desktop printer under $10,000.00 USD. The LCD menu panel, rotary touch dial, and SD Card slot are located at waist height when the machine is placed on a table-top or desk. This arrangement allows for a more convenient menu viewing angle and control access. The powder-coated frame is currently only available in Blue.

However, the most significant update for the Duplicator line is our introduction of the Wanhao Maker software. Check out the photos section for some screenshots and head over to our Support and Software page to download the latest copy. Installation of the software is easy and straightforward…from software download to build commencement takes less than 15 minutes.

SPECS:

Printing

 Technology: FDM/FFF (Fused Deposition Modeling/Fused Filament Fabrication)

 Build Volume (LWH): 305mm x 205mm x 575mm (12” x 8.07” x 22.63”)

 Nozzle Size: 400 microns (0.4mm/0.015”)

 Maximum Temperature: 260°C

 Top Print Speed: 360mm/s

 Layer Resolution: 20-100 microns

 Heated Bed: Yes

 Filament Diameter: 3mm/2.85mm (0.118”)

 Filament Compatibility: PLA, NYLON 645, PVA, and ABS

 

Mechanical and Electrical

 

 Power: AC Input 100-240V, 4A, 50-60Hz, 200W max; Requires 24V DC @9.2AMPS

 Print System: Linear Bearings

 Extruder: Single Bowden

 Firmware: Wenhao Maker

 Interface: Screen and Scroll Knob

 Connectivity: USB Cable, SD Card

 Average Operational Noise: 48dBA

 Weight: 44kg (96lbs)

 Overall Size (LWH): 400mm x 460mm x 860mm (15.7” x 18.11” x 33.86”)

 Construction: Powder-Coated Blue Frame

 

Software

 Slicing: Wanhao Maker Software

 File Type: STL, .i file

 Compatible Operating Systems:Windows XP+, Mac OS X (via Virtural Software)

 

Included with Purchase

Wanhao Duplicator 5S 3D Printer

One Year Warranty and Lifetime Support by NWA3D

1kg Black PLA

Power Cord

USB Cord

Spare Parts

Mini SD Card

Mini SD Card Reader

Printer Manual

Wanhao Maker Slicing Software

Test Prints

3D Printing Tool Bag

Filament List by NWA3D

Beginner’s Guide to 3D Printing by NWA3D

A5 3D Printer Troubleshooting Guide by NWA3D


Related Items